serial port issue
Jorid
joridporeci at gmail.com
Sat Jul 14 04:24:16 UTC 2007
hi there, i am new to this list. i purchased 3 weeks ago the RFID-reader
v0.4 ready-to-use<https://shop.openpcd.org/product_info.php?products_id=28&osCsid=0ndsg1glgdqpsdpc2i30fnigb4>.
I am trying to flash a complete flash image (using SAM-BA) but i have
a
problem . My box recognizes the usb device
lsusb
Bus 001 Device 006: ID 03eb:6124 Atmel Corp.
but when i type
dmesg | grep ttyUSB
nothing comes out. any idea??
this is a entire copy of my dmesg output
[ 0.000000] Linux version 2.6.20-16-generic (root at terranova) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu
2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size:
0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size:
0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000001bed0000 end: 000000001bfd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bfd0000 size:
000000000000f000 end: 000000001bfdf000 type: 3
[ 0.000000] copy_e820_map() start: 000000001bfdf000 size:
0000000000021000 end: 000000001c000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size:
0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size:
0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff7c0000 size:
0000000000840000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
thanks in advance to any reply
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)
[ 0.000000] BIOS-e820: 000000001bfd0000 - 000000001bfdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bfdf000 - 000000001c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 114640) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114640
[ 0.000000] HighMem 114640 -> 114640
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114640
[ 0.000000] On node 0 totalpages: 114640
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109681 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @
0x000fa910
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x02000410 MSFT 0x00000097)
@ 0x1bfd0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x02000410 MSFT 0x00000097)
@ 0x1bfd0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x02000410 MSFT 0x00000097)
@ 0x1bfd0390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x02000410 MSFT 0x00000097)
@ 0x1bfdf040
[ 0.000000] ACPI: DSDT (v001 A0029 A0029003 0x00000003 INTL 0x02002026)
@ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1c000000:e2c00000)
[ 0.000000] Detected 2191.332 MHz processor.
[ 16.754993] Built 1 zonelists. Total pages: 113745
[ 16.754997] Kernel command line:
root=UUID=105eba21-90d1-4a90-b7fa-db7a5227e3fa ro quiet splash
[ 16.755143] mapped APIC to ffffd000 (fee00000)
[ 16.755146] mapped IOAPIC to ffffc000 (fec00000)
[ 16.755149] Enabling fast FPU save and restore... done.
[ 16.755151] Enabling unmasked SIMD FPU exception support... done.
[ 16.755160] Initializing CPU#0
[ 16.755218] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 16.756598] Console: colour VGA+ 80x25
[ 16.756881] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 16.757111] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 16.767270] Memory: 443576k/458560k available (1992k kernel code, 14468k
reserved, 900k data, 328k init, 0k highmem)
[ 16.767280] virtual kernel memory layout:
[ 16.767281] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 16.767282] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.767283] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 16.767284] lowmem : 0xc0000000 - 0xdbfd0000 ( 447 MB)
[ 16.767285] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 16.767287] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 16.767288] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 16.767291] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 16.847165] Calibrating delay using timer specific routine..
4385.95BogoMIPS (lpj=8771914)
[ 16.847209] Security Framework v1.0.0 initialized
[ 16.847215] SELinux: Disabled at boot.
[ 16.847232] Mount-cache hash table entries: 512
[ 16.847383] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
00000000 00000000 00000000 00000000
[ 16.847391] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 16.847394] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.847396] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000
00000420 00000000 00000000 00000000
[ 16.847406] Compat vDSO mapped to ffffe000.
[ 16.847411] Remapping vsyscall page to ffffe000
[ 16.847421] Checking 'hlt' instruction... OK.
[ 16.863281] SMP alternatives: switching to UP code
[ 16.863528] Freeing SMP alternatives: 11k freed
[ 16.863745] Early unpacking initramfs... done
[ 17.132552] ACPI: Core revision 20060707
[ 17.133256] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not
found, using machine DSDT.
[ 17.134970] CPU0: AMD Athlon(tm) XP 3200+ stepping 00
[ 17.135000] Total of 1 processors activated (4385.95 BogoMIPS).
[ 17.135194] ENABLING IO-APIC IRQs
[ 17.135386] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 17.282939] Brought up 1 CPUs
[ 17.283171] Booting paravirtualized kernel on bare hardware
[ 17.283242] Time: 0:03:35 Date: 00/01/101
[ 17.283274] NET: Registered protocol family 16
[ 17.283372] EISA bus registered
[ 17.283376] ACPI: bus type pci registered
[ 17.284096] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 17.284098] PCI: Using configuration type 1
[ 17.284100] Setting up standard PCI resources
[ 17.292146] ACPI: Interpreter enabled
[ 17.292149] ACPI: Using IOAPIC for interrupt routing
[ 17.292947] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.292952] PCI: Probing PCI hardware (bus 00)
[ 17.293119] PCI: nForce2 C1 Halt Disconnect fixup
[ 17.293759] Boot video device is 0000:02:00.0
[ 17.293798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.301534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 17.305651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 17.306842] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *0, disabled.
[ 17.307184] ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
[ 17.307510] ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *0, disabled.
[ 17.307844] ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled.
[ 17.308174] ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *11
[ 17.308490] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5
[ 17.308813] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5
[ 17.309130] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5
[ 17.309451] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3
[ 17.309771] ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.
[ 17.310092] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
[ 17.310410] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 17.310728] ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10
[ 17.311064] ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *11
[ 17.311403] ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.
[ 17.311779] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 17.311859] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.311869] pnp: PnP ACPI init
[ 17.315927] pnp: PnP ACPI: found 14 devices
[ 17.315931] PnPBIOS: Disabled by ACPI PNP
[ 17.315986] PCI: Using ACPI for IRQ routing
[ 17.315989] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 17.327253] NET: Registered protocol family 8
[ 17.327255] NET: Registered protocol family 20
[ 17.327966] pnp: 00:0b: ioport range 0x480-0x4ff has been reserved
[ 17.328220] PCI: Bridge: 0000:00:08.0
[ 17.328223] IO window: d000-dfff
[ 17.328228] MEM window: fb700000-fb8fffff
[ 17.328231] PREFETCH window: disabled.
[ 17.328236] PCI: Bridge: 0000:00:1e.0
[ 17.328237] IO window: disabled.
[ 17.328241] MEM window: fb900000-fdafffff
[ 17.328244] PREFETCH window: eb400000-f35fffff
[ 17.328254] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 17.328286] NET: Registered protocol family 2
[ 17.366928] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 17.367013] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 17.367183] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 17.367267] TCP: Hash tables configured (established 16384 bind 8192)
[ 17.367269] TCP reno registered
[ 17.378949] checking if image is initramfs... it is
[ 17.891004] Freeing initrd memory: 6781k freed
[ 17.891456] audit: initializing netlink socket (disabled)
[ 17.891471] audit(978307415.216:1): initialized
[ 17.891573] VFS: Disk quotas dquot_6.5.1
[ 17.891590] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.891637] io scheduler noop registered
[ 17.891639] io scheduler anticipatory registered
[ 17.891641] io scheduler deadline registered
[ 17.891648] io scheduler cfq registered (default)
[ 17.946689] isapnp: Scanning for PnP cards...
[ 18.300895] isapnp: No Plug & Play device found
[ 18.322933] Real Time Clock Driver v1.12ac
[ 18.322990] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 18.323117] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.323736] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.323923] mice: PS/2 mouse device common for all mice
[ 18.324466] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 18.324713] input: Macintosh mouse button emulation as
/class/input/input0
[ 18.324744] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.324748] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 18.324950] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 18.327807] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.327813] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.327959] EISA: Probing bus 0 at eisa.0
[ 18.327983] Cannot allocate resource for EISA slot 4
[ 18.328003] EISA: Detected 0 cards.
[ 18.358076] TCP cubic registered
[ 18.358082] NET: Registered protocol family 1
[ 18.358104] Using IPI No-Shortcut mode
[ 18.358166] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.358211] Magic number: 1:550:50
[ 18.358220] Time: tsc clocksource has been installed.
[ 18.358754] Freeing unused kernel memory: 328k freed
[ 18.374249] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.567776] Capability LSM initialized
[ 20.039330] usbcore: registered new interface driver usbfs
[ 20.039359] usbcore: registered new interface driver hub
[ 20.039382] usbcore: registered new device driver usb
[ 20.040032] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 20.040491] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 20.040500] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22
(level, high) -> IRQ 16
[ 20.040515] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 20.040518] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 20.040691] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 20.040711] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe900000
[ 20.064076] forcedeth.c: Reverse Engineered nForce ethernet driver.
Version 0.59.
[ 20.097181] ieee1394: Initialized config rom entry `ip1394'
[ 20.114933] usb usb1: configuration #1 chosen from 1 choice
[ 20.114960] hub 1-0:1.0: USB hub found
[ 20.114973] hub 1-0:1.0: 3 ports detected
[ 20.191479] Floppy drive(s): fd0 is 1.44M
[ 20.221601] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 20.221611] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21
(level, high) -> IRQ 17
[ 20.221630] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 20.221634] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 20.221658] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
[ 20.221678] ohci_hcd 0000:00:02.1: irq 17, io mem 0xfea00000
[ 20.251496] FDC 0 is a post-1991 82077
[ 20.283127] usb usb2: configuration #1 chosen from 1 choice
[ 20.283155] hub 2-0:1.0: USB hub found
[ 20.283165] hub 2-0:1.0: 3 ports detected
[ 20.389942] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 20.389954] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20
(level, high) -> IRQ 18
[ 20.389968] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 20.389972] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 20.390002] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 3
[ 20.390039] ehci_hcd 0000:00:02.2: debug port 1
[ 20.390044] PCI: cache line size of 64 is not supported by device
0000:00:02.2
[ 20.390056] ehci_hcd 0000:00:02.2: irq 18, io mem 0xfeb00000
[ 20.390064] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 20.390144] usb usb3: configuration #1 chosen from 1 choice
[ 20.390171] hub 3-0:1.0: USB hub found
[ 20.390182] hub 3-0:1.0: 6 ports detected
[ 20.497441] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
[ 20.497447] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LKLN] -> GSI 22
(level, high) -> IRQ 16
[ 20.497455] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 20.960596] usb 3-3: new high speed USB device using ehci_hcd and address
2
[ 21.017163] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:
04.0
[ 21.017670] ACPI: PCI Interrupt Link [LFWR] enabled at IRQ 21
[ 21.017675] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LFWR] -> GSI 21
(level, high) -> IRQ 17
[ 21.017682] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 21.069702] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[fe500000-fe5007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 21.076840] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 21.076859] NFORCE2: chipset revision 162
[ 21.076861] NFORCE2: not 100% native mode: will probe irqs later
[ 21.076866] NFORCE2: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 21.076872] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 21.076881] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio,
hdb:DMA
[ 21.076893] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
hdd:pio
[ 21.076902] Probing IDE interface ide0...
[ 21.118002] usb 3-3: configuration #1 chosen from 1 choice
[ 21.300475] usbcore: registered new interface driver libusual
[ 21.306935] SCSI subsystem initialized
[ 21.308266] Initializing USB Mass Storage driver...
[ 21.604199] usb 1-3: new full speed USB device using ohci_hcd and address
3
[ 21.819385] usb 1-3: configuration #1 chosen from 1 choice
[ 21.822537] scsi0 : SCSI emulation for USB Mass Storage devices
[ 21.822578] usb-storage: device found at 2
[ 21.822580] usb-storage: waiting for device to settle before scanning
[ 21.822615] scsi1 : SCSI emulation for USB Mass Storage devices
[ 21.822647] usb-storage: device found at 3
[ 21.822649] usb-storage: waiting for device to settle before scanning
[ 21.822657] usbcore: registered new interface driver usb-storage
[ 21.822660] USB Mass Storage support registered.
[ 22.185838] ohci1394: fw-host0: SelfID received outside of bus reset
sequence
[ 22.195950] hdb: LITE-ON DVDRW SOHW-812S, ATAPI CD/DVD-ROM drive
[ 22.252402] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 22.252816] Probing IDE interface ide1...
[ 22.455844] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0067109700e01800]
[ 22.539735] hdc: Maxtor 6L200P0, ATA DISK drive
[ 23.214247] ide1 at 0x170-0x177,0x376 on irq 15
[ 23.243056] libata version 2.20 loaded.
[ 23.264661] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 23.264671] Uniform CD-ROM driver Revision: 3.20
[ 23.274734] hdc: max request size: 512KiB
[ 23.276282] hdc: 398297088 sectors (203928 MB) w/8192KiB Cache,
CHS=24792/255/63, UDMA(133)
[ 23.277866] hdc: cache flushes supported
[ 23.277907] hdc: hdc1 hdc2 hdc3 < hdc5 >
[ 23.525592] Attempting manual resume
[ 23.525596] swsusp: Resume From Partition 22:5
[ 23.525598] PM: Checking swsusp image.
[ 23.538822] PM: Resume from disk failed.
[ 23.568652] kjournald starting. Commit interval 5 seconds
[ 23.568665] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.921102] usb-storage: device scan complete
[ 26.922835] usb-storage: device scan complete
[ 26.929835] scsi 1:0:0:0: Direct-Access Generic USB SD Reader
1.00 PQ: 0 ANSI: 0
[ 26.936822] scsi 1:0:0:1: Direct-Access Generic USB CF Reader
1.01 PQ: 0 ANSI: 0
[ 26.943811] scsi 1:0:0:2: Direct-Access Generic USB SM Reader
1.02 PQ: 0 ANSI: 0
[ 26.950803] scsi 1:0:0:3: Direct-Access Generic USB MS Reader
1.03 PQ: 0 ANSI: 0
[ 26.956413] scsi 0:0:0:0: Direct-Access Maxtor 3200
0343 PQ: 0 ANSI: 4
[ 31.391672] NET: Registered protocol family 17
[ 31.800755] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.802441] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.943905] Linux agpgart interface v0.102 (c) Dave Jones
[ 31.950636] agpgart: Detected NVIDIA nForce2 chipset
[ 31.954900] agpgart: AGP aperture is 64M @ 0xf4000000
[ 32.266118] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4300
[ 32.266158] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4340
[ 32.390790] logips2pp: Detected unknown logitech mouse model 0
[ 32.508636] input: PC Speaker as /class/input/input2
[ 32.553356] nvidia: module license 'NVIDIA' taints kernel.
[ 32.820563] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 32.821596] sda: Write Protect is off
[ 32.821600] sda: Mode Sense: 17 00 00 00
[ 32.821602] sda: assuming drive cache: write through
[ 32.822754] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 32.823818] sda: Write Protect is off
[ 32.823822] sda: Mode Sense: 17 00 00 00
[ 32.823824] sda: assuming drive cache: write through
[ 32.823829] sda:ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16
[ 32.826074] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 16
(level, high) -> IRQ 19
[ 32.826497] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu
Nov 9 17:38:10 PST 2006
[ 32.828620] sda1
[ 32.828756] sd 0:0:0:0: Attached scsi disk sda
[ 32.876872] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 32.884046] parport: PnPBIOS parport detected.
[ 32.884133] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 32.892637] SCSI device sdb: 3970048 512-byte hdwr sectors (2033 MB)
[ 32.937081] sdb: Write Protect is off
[ 32.937086] sdb: Mode Sense: 03 00 00 00
[ 32.937088] sdb: assuming drive cache: write through
[ 32.961608] SCSI device sdb: 3970048 512-byte hdwr sectors (2033 MB)
[ 32.975047] sdb: Write Protect is off
[ 32.975052] sdb: Mode Sense: 03 00 00 00
[ 32.975054] sdb: assuming drive cache: write through
[ 32.975059] sdb: sdb1
[ 32.985756] sd 1:0:0:0: Attached scsi removable disk sdb
[ 33.033855] sd 1:0:0:1: Attached scsi removable disk sdc
[ 33.107682] sd 1:0:0:2: Attached scsi removable disk sdd
[ 33.157957] sd 1:0:0:3: Attached scsi removable disk sde
[ 33.195215] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.195254] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 33.195287] sd 1:0:0:1: Attached scsi generic sg2 type 0
[ 33.195323] sd 1:0:0:2: Attached scsi generic sg3 type 0
[ 33.195356] sd 1:0:0:3: Attached scsi generic sg4 type 0
[ 33.243020] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 33.243027] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 20
(level, high) -> IRQ 18
[ 33.243056] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 33.556751] intel8x0_measure_ac97_clock: measured 52846 usecs
[ 33.556755] intel8x0: clocking to 47413
[ 33.732153] fuse init (API version 7.8)
[ 33.763309] lp0: using parport0 (interrupt-driven).
[ 33.810027] Adding 1317288k swap on
/dev/disk/by-uuid/6833da64-832b-4761-a8fa-f777c5b35779. Priority:-1
extents:1 across:1317288k
[ 33.921051] EXT3 FS on hdc1, internal journal
[ 34.382059] EXT3-fs: Unrecognized mount option "0" or missing value
[ 35.022043] NET: Registered protocol family 10
[ 35.022143] lo: Disabled Privacy Extensions
[ 40.827446] No dock devices found.
[ 40.862144] ibm_acpi: ec object not found
[ 40.894834] Using specific hotkey driver
[ 41.084366] input: Power Button (FF) as /class/input/input4
[ 41.088775] ACPI: Power Button (FF) [PWRF]
[ 41.116932] input: Power Button (CM) as /class/input/input5
[ 41.121302] ACPI: Power Button (CM) [PWRB]
[ 41.140407] pcc_acpi: loading...
[ 45.966310] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 45.966680] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 45.966928] agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
[ 46.620708] ppdev: user-space parallel port driver
[ 47.256279] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 47.256285] apm: overridden by ACPI.
[ 47.462927] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 47.549251] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 47.549701] NFSD: starting 90-second grace period
[ 48.936969] Bluetooth: Core ver 2.11
[ 48.937044] NET: Registered protocol family 31
[ 48.937046] Bluetooth: HCI device and connection manager initialized
[ 48.937050] Bluetooth: HCI socket layer initialized
[ 49.236409] Bluetooth: L2CAP ver 2.8
[ 49.236413] Bluetooth: L2CAP socket layer initialized
[ 49.904129] Bluetooth: RFCOMM socket layer initialized
[ 49.904146] Bluetooth: RFCOMM TTY layer initialized
[ 49.904148] Bluetooth: RFCOMM ver 1.8
[ 61.363504] eth0: no IPv6 routers present
[ 92.193676] kjournald starting. Commit interval 5 seconds
[ 92.193794] EXT3-fs warning: maximal mount count reached, running e2fsck
is recommended
[ 92.194522] EXT3 FS on sda1, internal journal
[ 92.194595] EXT3-fs: mounted filesystem with ordered data mode.
[ 3508.084182] usb 3-6: new high speed USB device using ehci_hcd and address
4
[ 3508.217906] usb 3-6: configuration #1 chosen from 2 choices
[ 3508.218961] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3508.219034] usb-storage: device found at 4
[ 3508.219036] usb-storage: waiting for device to settle before scanning
[ 3513.217199] usb-storage: device scan complete
[ 3513.217694] scsi 2:0:0:0: Direct-Access Apple iPod
2.70 PQ: 0 ANSI: 4
[ 3513.219789] SCSI device sdf: 1010432 512-byte hdwr sectors (517 MB)
[ 3513.220535] sdf: Write Protect is off
[ 3513.220538] sdf: Mode Sense: 64 00 00 08
[ 3513.220541] sdf: assuming drive cache: write through
[ 3513.222356] SCSI device sdf: 1010432 512-byte hdwr sectors (517 MB)
[ 3513.223158] sdf: Write Protect is off
[ 3513.223162] sdf: Mode Sense: 64 00 00 08
[ 3513.223163] sdf: assuming drive cache: write through
[ 3513.223167] sdf:
[ 3513.224942] sd 2:0:0:0: Attached scsi removable disk sdf
[ 3513.224993] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 5546.339130] cdrom: This disc doesn't have any tracks I recognize!
[ 9388.931085] cdrom: This disc doesn't have any tracks I recognize!
[ 9433.031802] scsi: unknown opcode 0x01
[12494.882175] usb 1-2: new full speed USB device using ohci_hcd and address
4
[12495.077994] usb 1-2: configuration #1 chosen from 1 choice
[13177.974544] usb 1-2: USB disconnect, address 4
[13242.569544] usb 1-2: new full speed USB device using ohci_hcd and address
5
[13242.765221] usb 1-2: configuration #1 chosen from 1 choice
[13373.607971] usb 1-2: USB disconnect, address 5
[13380.819082] usb 1-2: new full speed USB device using ohci_hcd and address
6
[13381.022807] usb 1-2: configuration #1 chosen from 1 choice
[34332.628711] usb 3-6: USB disconnect, address 4
[34332.977289] scsi 2:0:0:0: rejecting I/O to dead device
[154324.871334] usb 3-3: USB disconnect, address 2
[154324.884680] Buffer I/O error on device sda1, logical block 7785
[154324.884687] lost page write due to I/O error on sda1
[154324.884696] Aborting journal on device sda1.
[154324.884708] journal commit I/O error
[154324.884749] Buffer I/O error on device sda1, logical block 141546
[154324.884751] lost page write due to I/O error on sda1
[154324.884756] Buffer I/O error on device sda1, logical block 163853
[154324.884758] lost page write due to I/O error on sda1
[154324.884762] Buffer I/O error on device sda1, logical block 7
[154324.884765] lost page write due to I/O error on sda1
[154324.884768] Buffer I/O error on device sda1, logical block 13
[154324.884770] lost page write due to I/O error on sda1
[154324.884821] Buffer I/O error on device sda1, logical block 4227074
[154324.884823] lost page write due to I/O error on sda1
[154324.884826] Buffer I/O error on device sda1, logical block 4227075
[154324.884828] lost page write due to I/O error on sda1
[154324.884831] Buffer I/O error on device sda1, logical block 4227076
[154324.884834] lost page write due to I/O error on sda1
[154324.884837] Buffer I/O error on device sda1, logical block 4227077
[154324.884839] lost page write due to I/O error on sda1
[154324.884842] Buffer I/O error on device sda1, logical block 4227078
[154324.884844] lost page write due to I/O error on sda1
[154325.694598] scsi 0:0:0:0: rejecting I/O to dead device
[154325.695255] scsi 0:0:0:0: rejecting I/O to dead device
[236149.803705] usb 3-3: new high speed USB device using ehci_hcd and
address 8
[236149.953050] usb 3-3: configuration #1 chosen from 1 choice
[236149.953279] scsi3 : SCSI emulation for USB Mass Storage devices
[236149.953405] usb-storage: device found at 8
[236149.953408] usb-storage: waiting for device to settle before scanning
[236154.948841] usb-storage: device scan complete
[236154.984190] scsi 3:0:0:0: Direct-Access Maxtor 3200
0343 PQ: 0 ANSI: 4
[236154.986019] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[236154.986892] sda: Write Protect is off
[236154.986895] sda: Mode Sense: 17 00 00 00
[236154.986898] sda: assuming drive cache: write through
[236154.987764] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[236154.988646] sda: Write Protect is off
[236154.988649] sda: Mode Sense: 17 00 00 00
[236154.988651] sda: assuming drive cache: write through
[236154.988654] sda: sda1
[236158.658058] sd 3:0:0:0: Attached scsi disk sda
[236158.658276] sd 3:0:0:0: Attached scsi generic sg0 type 0
[236195.270515] kjournald starting. Commit interval 5 seconds
[236195.270545] EXT3-fs warning: maximal mount count reached, running e2fsck
is recommended
[236195.288346] EXT3 FS on sda1, internal journal
[236195.288355] EXT3-fs: recovery complete.
[236195.290683] EXT3-fs: mounted filesystem with ordered data mode.
[236313.741404] usb 3-3: USB disconnect, address 8
[236313.749446] printk: 25 messages suppressed.
[236313.749453] Buffer I/O error on device sda1, logical block 1093
[236313.749458] lost page write due to I/O error on sda1
[236313.749462] Aborting journal on device sda1.
[236313.749474] journal commit I/O error
[236313.749497] Buffer I/O error on device sda1, logical block 26509314
[236313.749500] lost page write due to I/O error on sda1
[236314.240682] scsi 3:0:0:0: rejecting I/O to dead device
[236314.240694] Buffer I/O error on device sda1, logical block 530
[236314.240696] lost page write due to I/O error on sda1
[236314.241707] scsi 3:0:0:0: rejecting I/O to dead device
[236314.241712] Buffer I/O error on device sda1, logical block 0
[236314.241714] lost page write due to I/O error on sda1
[238621.754559] usb 3-3: new high speed USB device using ehci_hcd and
address 9
[238621.903885] usb 3-3: configuration #1 chosen from 1 choice
[238621.904123] scsi4 : SCSI emulation for USB Mass Storage devices
[238621.904254] usb-storage: device found at 9
[238621.904257] usb-storage: waiting for device to settle before scanning
[238626.899535] usb-storage: device scan complete
[238627.634390] scsi 4:0:0:0: Direct-Access Maxtor 3200
0343 PQ: 0 ANSI: 4
[238627.636100] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[238627.636971] sda: Write Protect is off
[238627.636974] sda: Mode Sense: 17 00 00 00
[238627.636976] sda: assuming drive cache: write through
[238627.638093] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[238627.639091] sda: Write Protect is off
[238627.639094] sda: Mode Sense: 17 00 00 00
[238627.639096] sda: assuming drive cache: write through
[238627.639099] sda: sda1
[238627.660808] sd 4:0:0:0: Attached scsi disk sda
[238627.660866] sd 4:0:0:0: Attached scsi generic sg0 type 0
[238639.734827] kjournald starting. Commit interval 5 seconds
[238639.734842] EXT3-fs warning: maximal mount count reached, running e2fsck
is recommended
[238639.735659] EXT3 FS on sda1, internal journal
[238639.735665] EXT3-fs: mounted filesystem with ordered data mode.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openpcd.org/pipermail/openpcd-devel/attachments/20070714/ddbbc2a4/attachment.htm
More information about the openpcd-devel
mailing list