serial port issue

[Kn1ght L0rd]

Jorid,

Why are you flashing the firmware using the serial cable anyway?  My
understanding is the only reason to use that is if you are changing the
sam7dfu.  You use dru-programmer to upload new firmware which just uses the
normal USB cable.  I too am playing with the same unit and I am designing
firmware for it so I have been doing tons of research into embedded systems
programming and the openPCD device.  I was just curious of your reasoning so
I can possibly add it to my research.  Thanks.

Milosch,

I don't know if your email system is blocking my emails or not but I have
sent you two emails that you have not responded to and usually you respond
the next day.  I just want to make sure that you are getting my
communications alright.  If I need to use another email address I can.  Let
me know.  Thanks.




On 7/14/07, Milosch Meriac <meriac at bitmanufaktur.de> wrote:
>
> Dear Jorid,
>
> Jorid wrote:
> > have a problem . My box recognizes the usb device lsusb Bus 001
> > Device 006: ID 03eb:6124 Atmel Corp.
> >
> > but when i typeoptions usbserial vendor=0x03EB product=0x6124
> >
> > dmesg | grep ttyUSB
> >
> > nothing comes out. any idea??
>
> Have you added "options usbserial vendor=0x03EB product=0x6124" to your
> modprobe.conf(.local) ? according to
> http://wiki.openpcd.org/index.php/Firmware ?
>
> Also make sure that the module subserial is actually loaded:
>
> # modprobe usbserial
>
> a quick way to check:
> # rmmod usbserial
> # modprobe usbserial vendor=0x03EB product=0x6124
>
> Warmest regards,
>
> Milosch Meriac
> --
> Bitmanufaktur :: Schwedter Strasse 23 :: 10119 Berlin
> Fon +49 (0)30 4172 5006 :: Fax +49 (0)30 4172 5054
> meriac at bitmanufaktur.de :: http://bitmanufaktur.de
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openpcd.org/pipermail/openpcd-devel/attachments/20070714/8e4d4bca/attachment.html