Getting my new OpenPCD working

[Power, Mike]

I just got my new OpenPCD plugged in and I wanted to go though some
basic setup to make sure I had configured everything correctly.

 

I followed the instructions here:

http://wiki.openpcd.org/wiki/Getting_started

 

I have a couple things the are concerning, like the tty device doesn't
show up, and I can not make the LEDs change behavior.  But ultimately
when using the librfid-tool then the device becomes intermittent and can
not seem to detect my Mifare Classic 1k cards.  

 

Below is the output, this is basically a text dump of me running the
various commands and some others in a series.  

 

Any idea of what is wrong?

 

Mike Power

 

mpower at mtvd04a119587:~/workspace/OpenPCD/librfid/utils$ lsusb Bus 004
Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device
028: ID 16c0:076b Bus 002 Device 001: ID 0000:0000 Bus 001 Device 041:
ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse Bus 001 Device
004: ID 04b3:301b IBM Corp. SK-8815 Keyboard Bus 001 Device 003: ID
0557:7000 ATEN International Co., Ltd Hub Bus 001 Device 001: ID
0000:0000  

 

mpower at mtvd04a119587:~/workspace/OpenPCD/librfid/utils$ sudo lsusb -v -d
16c0:076b [sudo] password for mpower: 

 

Bus 002 Device 028: ID 16c0:076b

Device Descriptor:

  bLength                18

  bDescriptorType         1

  bcdUSB               1.00

  bDeviceClass          255 Vendor Specific Class

  bDeviceSubClass       255 Vendor Specific Subclass

  bDeviceProtocol       255 Vendor Specific Protocol

  bMaxPacketSize0         8

  idVendor           0x16c0 

  idProduct          0x076b 

...

Device Status:     0x0000

  (Bus Powered)

 

mpower at mtvd04a119587:~/workspace/OpenPCD/host$ lsmod

Module                  Size  Used by

ftdi_sio               37256  0 

usbserial              35688  1 ftdi_sio

...

softcursor              3072  1 bitblit

fuse                   50580  3 

 

mpower at mtvd04a119587:~/workspace/OpenPCD/host$ ls /dev/ttyUSB*

ls: cannot access /dev/ttyUSB*: No such file or directory

 

mpower at mtvd04a119587:~/workspace/OpenPCD/host$ sudo ./opcd_test -n
opcd_test - OpenPCD Test and Debug Program

(C) 2006 by Harald Welte <laforge at gnumonks.org>

 

TX: (8):  03 01 00 01 00 00 00 00

SERIAL: (4):  2d 74 a0 53

mpower at mtvd04a119587:~/workspace/OpenPCD/host$ sudo ./opcd_test -l 2 1
opcd_test - OpenPCD Test and Debug Program

(C) 2006 by Harald Welte <laforge at gnumonks.org>

 

setting LED 2 to on

TX: (4):  02 01 02 01

 

mpower at mtvd04a119587:~/workspace/OpenPCD/librfid/utils$ sudo
./librfid-tool -s lt-librfid-tool - (C) 2005-2008 by Harald Welte This
program is Free Software and has ABSOLUTELY NO WARRANTY

 

initializing librfid

opening reader handle OpenPCD, CM5x21

scanning for RFID token...

mpower at mtvd04a119587:~/workspace/OpenPCD/librfid/utils$ sudo
./librfid-tool -s lt-librfid-tool - (C) 2005-2008 by Harald Welte This
program is Free Software and has ABSOLUTELY NO WARRANTY

 

initializing librfid

opening reader handle OpenPCD, CM5x21

No OpenPCD found

No Omnikey Cardman 5x21 found

mpower at mtvd04a119587:~/workspace/OpenPCD/librfid/utils$ sudo
./librfid-tool -s lt-librfid-tool - (C) 2005-2008 by Harald Welte This
program is Free Software and has ABSOLUTELY NO WARRANTY

 

...repeats...

 

initializing librfid

opening reader handle OpenPCD, CM5x21

scanning for RFID token...

mpower at mtvd04a119587:~/workspace/OpenPCD/librfid/utils$ 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openpcd.org/pipermail/openpcd-devel/attachments/20080722/f5acb085/attachment.htm